How To Do Front Flash On Tiktok – A Complete Guide

Front Flash On Tiktok

Front Flash On Tiktok adds extra brightness to the videos. It enhances the overall quality of video and grabs the attention of most people. Setting up a front flash is important for people who make Tiktok videos.

Using a front flash is an awesome and simple trick to get extra attention on Tiktok videos. Now, the question is do you know how to set up a front flash on Tiktok? If not then this article is for you. This is because here we will discuss the easy steps to set up a front flash.

So without any further ado, let’s get started.

It’s an awesome technique to use on videos when you want a little extra attention. In this article, I will show you step-by-step instructions to do a front flash on Tiktok. So let’s begin the discussion to know more about tiktok..

Steps To Setup Front Flash On Tiktok

Front flash enhances the quality of the overall video and helps to gain maximum views. But many people forget to use front flash on Tiktok. Are you one of them? If yes, then review the easy steps to set up a front flash on Tiktok and enhance the Tiktok quality.

STEP 1: Setup Front Flash

The first thing you need to know how to do is set up a front flash. To use a front flash, you need to have a flash and a light source.

I recommend using two lights sources since I believe using two lights sources provides the most natural effect. One light source will provide a backlight and the other will give front light.

STEP 2: How To Position The Flash

To position your flash, find the bottom left corner of your screen. There is an arrow pointing down next to the name of your camera. That is your location.

From there, you’ll need to tilt your screen a little bit. Then, move your phone up until the flashing lights show.

If you can see that you are on the right angle, you are set. Once you’ve found the right spot, you’ll want to tap the power button. Then, rotate your screen until you have the right angle.

STEP 3: What Settings Should I Use?

The last step is choosing what settings you’d like to use. To get the best results, you will need to change some of the settings.


Turn your screen up so you can see the brightness. You can also play with the strength of the flash, but too much can look artificial.


This is your camera orientation. If you are in landscape mode, you should turn your phone so you have the phone in portrait.


If your flash was off, you should turn your phone up until the screen shows brightness. Then, move the screen forward until you see the flashing lights.


Your distance should be measured from your camera to the flash. You can check your distance by tapping on the flashlight icon, but you can also use the slider to adjust the size of the screen.


You should adjust this on the fly. If you find it’s too dark, tap on the slider and move it back. On the other side of the scale, you can also adjust the exposure up.


Make sure you are focused. Move the slider to focus on your subject.

White Balance

It is best to use an auto-white balance. You will notice you are given a screen telling you the correct temperature.


You will probably be fine with the standard ISO.

Step By Step Guide To Do Front Flash On Tiktok

The step by step guide given below popular tiktok videos

How To Make A Tiktok Using Front Flash?

After setting up a front flash, it’s time to take pictures and make Tiktok. Here is an easy step-by-step guide on how to do this. So let’s review these easy steps.

STEP 1: Get a good lens

The key here is finding a lens that is wide enough so you can crop it out later. On the iPhone 7s plus, it’s really hard to find a lens that will cover both the front and rear camera, but there are a couple of apps that can help you.

STEP 2: Open the Camera app

Open the Camera app and tap the square icon to open up the flash option. The first one is called the front flash. Tap that and you should see a small square in the corner. It’ll turn blue when the flash is on.

STEP 3: Set the time delay

Tap on the timer and slide it to the left. You’ll then be presented with a list of options. Make sure the flash is turned on (it should be blue by default) and tap on ‘Time Delay’. Slide the slider to the right, and hit Save.

STEP 4: Take your pictures

Your front flash should now be active. Tap on the flash and wait for it to charge. Then, take some pictures. The one thing to note is that when you start taking photos, the flash will automatically turn off. So if you don’t want the flash to turn off, tap the flash again and hold it down for as long as it takes for the flash to charge.

When you’re done, simply go back to the camera app and save the images.

Wrapping It All Up!!!

Let’s say you’re a newbie in the video game streaming niche, and you want to do a front flash effect, but you don’t know how to.

Do not worry as this is not a difficult task. You can use the above-mentioned guide to do a front flash on Tiktok. So make sure to follow all the

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *